The cold riveting method of rotary riveting machine is a kind of riveting method, in which the bolt is punched by a part of the bolt, and the focus fluctuates around the management department until the bolt is caused. According to the cold rolling track of riveting mode, it can be divided into shaking riveting mode and axial riveting mode.

In addition, the surface layer of the product workpiece is extruded according to the cylinder or hydraulic cylinder. In addition, the surface layer of the product workpiece is extruded to make the surface layer of the product workpiece deform instantly and lead to the expected riveting effect.

Axial riveting method is also called spherical red plum riveting. The "plum blossom" is also called the "long red flower" exercise on the surface. The track of bolt head management is closed trend chart. This riveting method can deform the bolt in three directions.

Compared with the two riveting methods, the axial riveting must release more pressure on the surface of the workpiece than the pendulum riveting, and its positive and negative spherical surface layer is easy to be damaged due to its immediate reduction. The equipment failure rate is very high. After many years of social practice, this kind of method has been gradually replaced by pendulum. The quality of product parts after production is not as good as pendulum type, and the equipment failure rate is very high, so now consumers choose pendulum type. Improve the riveting machine.

When riveting the products, the credibility of the swing is good, and there is no axial shaking of the hippocampal rivet products, which will damage the quality of production and manufacturing. When riveting, the vast majority of the products can be riveted without touching.

The standard elastic chuck of riveting machine is: 3 and 5, different models and specifications can be customized.